Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

rotor 700 1990

posted by  snenkov on  Fri Jun 17 13:54 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Nov 26 08:57 CST 2008
[RELATED]

Hi all,

If cylinder 1 is at TDC (meaning piston is at its highest point and white mark on the camshaft is up) what is the correct position of the rotor? Should it be pointing relatively up or down? Where should it point exactly?
I read that it is possible to put it 180deg in reverse? Is that the case because car does not want to start any more after changing the distributor? I tried to reverse it too but it does not seem to go into the camshaft notch..

Thanks in advance.
Stefan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New rotor [700][1990]
posted by  snenkov  on Fri Jun 17 13:54 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.