The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Conversion Ring, Master Cylinder, Final Setup 120-130

uid 37415's pic
posted by  Old Kombi on  Tue Oct 10 08:56 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 30 01:42 CST 2010
[RELATED]

Get the old pushrod and add the thickness of the cylinder adaptor to it plus about 1/4 inch. there should be some adjustment on the pedal so you just have to be close. As a rule of thumb I added the thickness of the spacer I made (.5" thick) plus 1/8" (.125") for a pushrod .625" longer than stock, mine is still a little short when fully adjusted out so when the paint dries and I get some time I plan to make a .75 longer pushrod.


Cheers!
Dave G.

PS remember- it is easier to cut or grind some off than it is to add it back on!





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.