Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

hi-low beam modification/ checking a relay 120-130

posted by  Phil S. on  Sat Dec 10 08:18 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:18 CST 2014
[RELATED]

Hi Damian,

First off, does the relay click when you pull the stalk? If not the problem is on the input side of the relay -- the stalk itself or the wiring. If it does click, proceed.

You may need to take the relay loose so you can see the terminal numbers. The outputs to the lights are numbered 51a and 51b. It doesn't matter which is the high and which is the low beams.

Swap the wires on those terminals, and see if that gives you high beams and no low beams. If so, the problem is the relay. If it makes no difference, the problem is the wiring to the high beams.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New hi-low beam modification/ checking a relay [120-130]
posted by  Damian  on Sat Dec 10 07:42 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.