Volvo RWD 700 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 5/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

760 ignition switch 700 1989

posted by  dvbydt on  Thu Sep 28 10:49 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 13 15:43 CST 2011
[RELATED]

Been there, done that. If you can get the key to position 2, then you can just press in the pin and pull the lock barrel out. The peg is attached to a flat spring and you need to use a Dremmel type high speed grinder to get it all out. If you put my username (dvbydt) into the search at the top of the page there is a picture of my efforts. Since you are going to have to fit a new barrel, it might be easier to drill out the lock with a 3/8 diameter drill, pick out the bits, then you can push in the pin.

Ian






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 760 ignition switch [700][1989]
posted by  someone claiming to be steve mahnken  on Wed Sep 27 08:25 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.