Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2006

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B20 head gasket change

posted by  AQ130C on  Thu Mar 1 17:33 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Mar 8 08:43 CST 2007
[RELATED]

I'm not really sure I understand your question. The steel rings on the gasket overlay the piston bore. They do not seat inside the bore. If I hold the edge of the gasket flush or(square)to any edge of the block, it doesn't seem to line up w/ the bores very well. If your mentioning any other ring, I'm in the dark as to what you are refering to. I'm sure your not talking about the piston rings. if the rings your refering to are like the removeable collets installed on the intake(between intake manifold and head), mine doesn't have them.
Thanks for the reply.
Eric





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B20 head gasket change
posted by  AQ130C  on Thu Mar 1 14:39 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.