Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

pulling the head on a B230FT 700 1989

posted by  jschaefer7406 on  Sun Apr 1 12:56 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jan 15 06:36 CST 2013
[RELATED]

Hi again,

Sorry for the delayed reply. If you have the right tools, you can completely disassemble the head yourself. You'll need a valve spring compressor. As you said, the best scenario is to hand the machine shop a bare head. If you have access to a spring compressor, I could walk you through disassembly. As for the seals, you could do those with the right tools also. If you have never done this before, you may wish to have a shop do it. Anyway, let me know what else you need.

Joe S. - Volvo Master Technician

2000 S70 AWD, 1995 850 Turbo, 1981 242 Turbo w/intercooler






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New pulling the head on a B230FT [700][1989]
posted by  beefstew  on Wed Mar 28 15:08 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.