|
You can buy the plastic piece here for $2. Has a pic to show how it opens up.
http://www.fcpgroton.com/Electrical/volvo700900b230.htm#dist
1346793 Insulator for Impulse Sensor
To repair, its easier if you remove the distributor. Best tools 8mm and 10mm gearwrench because of limited access. Pull plug wires\coil wire and mark them. Remove the 3screws(8mm) that holds the distributor cap, remove cap and rotor. Mark the distributor base and the valve cover where they meet,remove 2 10mm screws. Remove the distributor and note the wiring color. If you elect to epoxy. Give it ample time to dry. Install is the reverse.
--
Post Back. That's whats makes this forum work.
|