Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2002

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Groten control arms

posted by  poolman on  Wed May 9 00:13 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Dec 26 02:03 CST 2010
[RELATED]

I started into the 97- 960 yesterday and found on the drivers side and pasengers side as well that both large bushings have cracked on the control arms that were supplied to me from Groten. I have less that 30k miles on these control arms. Along with the above I found that the small bushing on the drivers side control arm is also shot. These arms were the Mayle brand and looked identical to the OEM control arms in every way. Be aware that when doing this job for your self ,that when the time comes you should buy the OEM bushings to make sure you don't have the same problem.
Poolman

PS-Should these bushings be lubed with any grease or such ,when being installed?
Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Groten control arms
posted by  poolman  on Wed May 9 00:13 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.