Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Adding a relay, where to hook up the hot wire 700 1989

posted by  Stickbuilder on  Tue Jun 3 01:07 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 03:31 CST 2014
[RELATED]

I don't know about the 700 series, but if it has a junction box on the driver's front fender, then this is the place to get a great 12VDC power source. Pop the cover off the junction box, and find an empty slot. Use a female spade connector and heavy duty wire, and you have the power. I did this when I added the auxillary cooling fan on my 245, and it works great. I used the A/C clutch wire and made a tap for the relay trigger wire. When the A/C clutch is on, the fan is on.

Bill






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Adding a relay, where to hook up the hot wire [700][1989]
posted by  Nmaslan  on Sun Jun 1 03:36 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.