|
THANKS for the help
i have ramps and i will set the car on those (the rear already is set on some) so after it gets bolted up and hand tightened, i will torque them down at ride height.
trouble is as mentioned what torque specifically.
in the Haynes manual it mentions the ball joint nut at 80 lb ft, and the castle nut at 60...
so which is correct or are the value clearly referring to a different bolt and nut as they are not numbered...
you are in Torrance I am in Costa MEsa
can you Email me a contact number ?
fiorano3 AT yahoo.com
|