Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Amazon front suspension torque values 120-130

posted by  derek uk on  Thu Sep 18 00:18 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:33 CST 2014
[RELATED]

Volvo Green Book says...
the cross bolt has a value in Haynes...but if aNY one has a specific torque i would like to see it to compare. "Bolt for upper control arm shaft" -- 35-40 ft lbs. I think the 2 nuts, top and bottom , are tightened to the end of the thread to set the amount of "squeeze" on the bushes. Once there, they will only turn a small amount for the correct torque.
the ball joint castle nut (lower arm) is?--------- 30-40 ft lbs
the little nuts holding the upper ball joint is?--- Not stated for either the 2 for the top ball joint or the 4 on the bottom one. 14-18 ft lbs, the same as the clamp nuts? sounds reasonable although I might use 25 ft lbs if it "feels" right.
the lower arm bolt torques are? (there are 4)--- see above.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Amazon front suspension torque values [120-130]
posted by  Fiorano  on Tue Sep 16 16:36 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.