Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Lets talk about Binary Heater Valve 200

uid 12839's pic
posted by  Paul Driver of Inga on  Tue Dec 16 06:33 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 25 16:42 CST 2012
[RELATED]

Hello,

Very aware of the binary valve, and tried the adjustment (more than once). Also tired to adjust the cable in attempt to get more control.

However Binary is good description, this is not an analog valve at least not a very good one. Still have on or off with even a slight jog of the leaver over to the right. This is a 24 year old part what appears to be in good shape as far as overall condition.

Was hoping someone had found another option even if it involved some plumbing that would offer at least slightly better control off that 190F coolant that is going through the heater core.

May not be out there, but never hurts to see what folks have worked up.

Regards,

Paul





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Lets talk about Binary Heater Valves or as I call it FOFO [200]
posted by  Paul Driver of Inga  on Mon Dec 15 16:12 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.