Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2009 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

740 no start 700 1986

All that fuel may have washed the oil from piston rings and cylinder walls.

Result = no compression. Pull all plugs and let it "breathe" for an hour or so.

Then put a small spoonful of oil into each cylinder and turn over by wrench on crank pulley bolt to spread the oil around.

Good luck getting that rubber boot back on.

Make sure CSValve isn't leaking under pressure, and disconnect wires temporarily to help stop flooding.

CIS = Constant Injection System (K-Jet) in some books.
--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 740 no start [700][1986]
posted by  aernout  on Thu Mar 5 23:35 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.