Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2006 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Glove shelf bracket fixed 120-130 1967

posted by  KlausC on  Fri Jun 19 07:16 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

All fixed! I got a nut/bolt to fit the center hole with a 1 1/4" washer, cleaned out the channel that the metal rods fit into, and put it together.

The bracket that is on the right fender wall is intact and works.

The vinyl that is supposed to be sewn to the metal brackets? Well, that is too far gone. At least the shelf no longer flops up and down when hitting bumps, and that was the object.

The car has door speakers! That work!! The one attached to the back of the shelf is OEM, not plugged in, and in poor health. It will not be replaced by me.

Besides, there is a 220 for sale about 120 miles from here, $800? Needs a new dizzy to run.

Klaus
--
Common sense trumps a PhD






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Glove shelf bracket? [120-130][1967]
posted by  KlausC subscriber  on Wed Jun 17 07:14 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.