|
Is that the same head before & after?
What sort of springs does the head have?
Is the head 73+ pr pre 73?
Were the stock valves used?
Did the guys that flow benched your head do the head mods?
Two things I absolutely would change: The cam, I'd ask Isky to grind a VV-71 on a 114LSA being sure to tell them that it's for supercharged engine. 2.Get a Mikuni (or use injection)
If stock valves were used in the head, then perhaps they didn't do a 30 degree backcut on the stock valve or something like that.
--
Three 164's, Two 144's, One 142 & a partridge in a pear tree.
|