Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2010 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

OBD I code 2-4-1 EGR 700

posted by  crazy_frog on  Mon Mar 1 18:33 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Apr 9 14:05 CST 2011
[RELATED]

I replaced it today. It is about a 4 mm vac hose. There is a nipple on the EGR valve that has the line attached to it and the other end connects about a foot away from the OBD (to that cylinder part that is grey). The line was severed at the EGR. As you know the EGR is under the intake. I used a long set of pliers that are curved on the end to remove the clip on the line. I put some new vac line in. And I did the vac line from the fuel pressure regulator back to the intake manifold. I cleared the codes and drove about 30 miles tonight and have not had the CEL turn back on.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New OBD I code 2-4-1 EGR [700]
posted by  crazy_frog  on Wed Feb 17 14:53 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.