Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Need to make a correction to instructions 200 1984

posted by  Onkel Udo II on  Fri Aug 12 14:53 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:50 CST 2014
[RELATED]

I think there was a bit of mis-communication on what your husband did to get out the spade connectors...so lets find out.

When the switch came apart in a couple of pieces, one was still stuck in the wiring plug, thingy. Did your husband pull out the individual male spade pieces from the wiring plug? If so, sheik's concerns are unwarranted. That's what I am guessing he did with the Leatherman. Button it all up and you will be good to go assuming you do not wish to attempt installing a relay that will remove this issue...which is a lot more involved (unlikely).

If that is not the case and the individual female connectors inside the plug were pried on (internally, making them grip the male pieces less tightly) to release the male spades, then Sheik's concern is very valid and we can go from there.

Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Headlights flickered and now won't work at all [200][1984]
posted by  someone claiming to be Old Volvo Driver  on Tue Aug 2 10:09 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.