Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2001 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Do I have to pull the transmission to replace the clutch fork? 700 1990

posted by  parchibald on  Tue Sep 13 20:24 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 10 16:42 CST 2013
[RELATED]

Sorry it took so long to reply.

I was able to "fix" the problem by JB Welding a nice thick hardened washer into the hole in the fork. I rounded off the edges of the washer with a grinder first, and scratched and etched the mating surfaces. As you know, there is pressure holding the washer in place, so the JB Weld just keeps it from shifting around.

I think this will last a long time. Next time I do the clutch, I will replace the fork.

Regards,
Paul Archibald






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Do I have to pull the transmission to replace the clutch fork? [700][1990]
posted by  parchibald  on Sun Aug 7 20:38 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.