Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2004 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ignition switch 120-130 1966

posted by  Budcoldweiser on  Fri Jun 1 11:32 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 30 15:03 CST 2014
[RELATED]

... the tumbler assembly and chrome bezel may be withdrawn from the FRONT.

If you want to replace the whole ignition switch assembly, once you have removed the tumbler assembly, the switch can be removed from the dashboard by removing the two phillips-head screws on the underside of the dash below the ignition switch. If the ignition switch and coil are original, they will be connected by an armored cable such that the coil and ignition switch must be removed and replaced together. This is pricey.
--
1966 122s, 1968 142s, 1969 144s, 1979 245dl, 1989 244gl






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ignition switch [120-130][1966]
posted by  volvolvr66  on Fri Jun 1 11:01 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.