Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2015 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Most baffling problem EVER! 700 1989

posted by  Brick Skinner on  Wed Apr 16 09:19 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 13 13:31 CST 2014
[RELATED]

When I peer into the valve cover while at TDC, I see that the front-most cam is about to contact the valve. The second cam back is at about 90° from the front one and on the way down also. So, I don't know where the cams should actually be oriented while at TDC. But I can say that the way mine looks at TDC is the same as shown in this picture...
http://www.ipdusa.com/uploads/images_products_slideshow/fullsize_7761.jpg
...cam lobes oriented about the same. In other words, if you put the cam in this picture directly into my car at exactly the same rotational position it would be at TDC.
--
signature







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Most baffling problem EVER! [700][1989]
posted by  Brick Skinner  on Tue Apr 15 19:04 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.