Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2004 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B20 Distributor needed 120-130 1967

posted by  Ronin7 on  Tue Aug 23 06:24 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 11 17:50 CST 2014
[RELATED]

Derek,

I am not too concerned about the extra contact system for the injectors as I don't think it will effect the central operation of the distributor but I am concerned as to whether the advance profile for the FI motor will be optimal for the carbed B20 but it will probably work.

The springs on the advance mechanism on the one I am trying to replace are stretched out and don't seem to be pulling the weights back into place- which ironically is fine since the weights themselves don't seem to want to move without significant force being applied. I disassembled the distributor yesterday and it seems there are many part missing (the fiber washers that space the weights up etc.)


Thanks for the info!

Nathan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B20 Distributor needed [120-130][1967]
posted by  Ronin7  on Sun Aug 21 17:52 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.