Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Re: How do I replace my clutch cable ? 200 1981

posted by  someone claiming to be carl krall on  Wed Nov 7 06:09 CST 2001 [RELATED]

Try lubing the cable pivot area on the pedal. Won't take much. This is a good place to use something like Tenacious Oil (bicycle product) which won't drip easily and clings to the metal it's applied to. Camera repair guys also use something like it, or did when cameras still had shutters and used film.

If that doesn't do it, make sure that the pedal hanger is bolted tight.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How do I replace my clutch cable ? [200][1981]
posted by  someone claiming to be Ken T  on Tue Nov 6 22:57 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.