Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2015 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Going to a shop 700 1988

posted by  Rtilghman on  Wed May 15 06:42 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]


you can straighten the rims. I recently took my alloy rims to a welder recommended by my tire place. The hardest part was actually having to switch the rims off the bloody car and pick up two used steel volvo rims at the junkyard.

The quote I got was for $180 for two rims. This includes full cleaning and truing so the rim looks like new. The guy actually showed me the warping on a special lathe with a pointed arm to track the rim's edge... one rim had a 1/2" bend! The bendwas so bad my tire had worked the rim shiny on that side from sitting high on the rim and moving around.

I put the tires in the garage and am thinking about it. I want to fix them, but I'd rather spend about $60-$70 per rim...

look for a welder in your area, they seem to be the folks that do this work. If you can't find one ask a tire place who they recommend.

-rt






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Going to a shop [700][1988]
posted by  UncommonDenominator  on Wed May 15 03:26 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.