Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2005 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

victory & question day 120-130 1965

posted by  122 and 940 and too many on  Tue May 28 22:55 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 25 13:12 CST 2011
[RELATED]


Hi Bram,

You're quite right that the lever is different, and as you say the cable clutch action is pull whereas the hydraulic pushes. However the action on the release bearing is the same because the pivot is placed differently. None of this affects the 3 piece clutch assembly. Originally there were umpteen different versions, indeed the early cars didn't use a diaphragm type clutch. All clutches for anything with a 18/B20, including 240's as well as the 240 up to '78 with B21 superseded out to part number 271263-6, this part number is for a 3 piece clutch kit, ie. it includes the release bearing. It is however not good practice to mix and match bits from different manufacturers.


Regards



Pete






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New victory & question day [120-130][1965]
posted by  SebCH  on Tue May 28 09:51 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.