Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2009 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B20E swap 140-160

posted by  walrus3 on  Fri Sep 13 13:03 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

Hey Joe!
Next time you drive down old 66 turn west at Vinita or north at Tulsa and
come and see us.

The dimension is the thickness from the valve cover gasket surface to the
head gasket surface, basically the thickness of the head.
The dimensions are:
B20A 86.7 mm (3.413") 8.7:1
B20B 86.2 mm (3.394") 9.3:1
B20E 84.9 mm (3.343") 10.5:1
B20F 87.0 mm (3.425") 8.7:1

The above is from the 1972 Green Volvo 140 series manual spec pages.
This is enough difference that you can easily measure it with a good
ruler and a sharp eye. Note that B20A and B20B don't have injector ports,
while B20E and B20F do, in addition to the biggest difference in thickness.
--
George Downs, The "original" Walrus3, Bartlesville, Oklahoma






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B20E swap [140-160]
posted by  someone claiming to be nipper  on Thu Sep 12 09:46 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.