Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2020

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

NO Start Injectors not pulsing

From what you have said:
spark OK at plugs
Fuel rail pressure present
12V to injectors

The prime suspect now is the radio suppression relay. A static test for 12V does not mean it is working. When the load of the injectors firing is applied a bad solder joint can kill the 12V output from it. Resolder it. You also said there was 12V at every lead. That would not be normal because one lead goes to ground.

--
David Hunter






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New NO Start Injectors not pulsing
posted by  SAUL  on Sat Nov 2 01:39 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.