|
Are you sure you've got the wires straight? YOu may be causing a short in the switch, spen some time with a continuity tester and work out with connection connects to what at each switch position, from this it's easy to work out which wire goes where. p.s. I've had a few of these switches, the only problem I've had is the dash board control wasn't delicate enough ( all on or all off).
--
Disclaimer: be careful, work safely!!! If you have any doubts as to the safety of the work you are doing, consult a proffessional before you hurt yourself or others!!! I'm not a licensed mechanic, I have just been fixing stuff my whole life, patrick of
|