Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ignition Control Unit 200 1986

posted by  someone claiming to be hillbilly on  Sat Feb 15 13:23 CST 2003 [RELATED]

The voltage that you are seeing on terminal 2 of the distributor comes from the ICU, this is the source. The Hall sensor provides a pulsed signal back to the ICU from terminal 3 on the distributor. Terminal 1 on the distributor is the negative and comes from terminal 3 on the ICU. The signal back to the ICU from terminal 3 on the distributor is hard to read although it will cause a digital meter to indicate a source voltage (across terminal 1 on the distributor). Check your connections at the ICU.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ignition Control Unit [200][1986]
posted by  yrots  on Sat Feb 15 03:12 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.