Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2011 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B-20 Injectors 140-160 1972

posted by  walrus3 on  Thu Feb 27 05:19 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

The injectors are different and the aluminum adaptors are different,
but the heads are essentially the same.
You will need an 8-bolt flywheel, as well as 12mm-1.75 bolts to bolt up the
bellhousing to the block, where the earlier block used 7/16"-14 UNC bolts.
Do not be deceived! The 7/16" bolts screw into the 12 mm holes pretty easily
but are loose.
--
George Downs, The "original" Walrus3, Bartlesville, Oklahoma






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B-20 Injectors [140-160][1972]
posted by  p-more  on Thu Feb 27 04:49 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.