Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2009 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Leaky injectors 140-160 1974

posted by  walrus3 on  Thu May 8 05:11 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

On a D-jet system the easy way is to pull the injectors intact with the
fuel rail and put a newspaper under them, then turn on the ignition to pressurize the system. Check for seepage on the paper. If there is none,
then crank the engine a few turns. See if they all spray a similar pattern
on the paper. If so the injectors are at least fairly good...
--
George Downs, The "original" Walrus3, Bartlesville, Oklahoma






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Leaky injectors [140-160][1974]
posted by  Winnipeg164  on Wed May 7 16:42 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.