Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Interchange?? 700

posted by  john sargent on  Wed Jun 4 02:20 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 09:07 CST 2014
[RELATED]

For the conversion, you need the front half of the driveshaft at a minimum. Volvo has stated that the driveshaft assembly is a matched, balanced, unit. I would get both pieces.

Don't forget about changing the pedal assembly, and installing the clutch master cylinder.

Yes, the crossmember is the same. It just mounts to the chassis in a different place.

Since your car is a 1987, you will need to change the relay base, or re-wire it. You will need an M46 OD relay, the the wire harness from the relay base to the transmission.

The neutral/park safety switch connection will need to be jumpered, or you will be wondering why the engine won't crank over.

You will find that you want the fifth gear/OD light.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Interchange?? [700]
posted by  someone claiming to be dadstoys2  on Mon Jun 2 16:06 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.