Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Caliper dust boot 700 1989

posted by  someone claiming to be tom108 on  Wed Sep 3 02:19 CST 2003 [RELATED]

Aslan,(are you related to THE Aslan,numero ono EPF)Just been to Malaysia,and could not believe the cheap mecahnics' rate there.If I live there,I would not be diy-ing myself.e.g.Headliner for a Mercedes Benz,parts and labour,30US$,40 Canadian$!!!!!!I bought a set of HRD alloys there for my MB,333 C$.Wow.Next time,I will buy the old set of oem Volvo wheels I saw,for 150C$.100US$.Much cheaper than ebay.

Anyway,I found that that you have to use a plastic cap ( I use one off a urine specimen bottle) and a c-clamp to press the inside lip in(the outer lip of the dust boot facing the disc sits in a groove.)

Seems to have worked for the last two months.I had the same problem as you had.Stuck caliper pin on one side,driver's side/

I will probably buy a rebuilt set of calipers shortly .If I had to do it again,I will def buy rebuilt calipers rather than diy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Caliper dust boot [700][1989]
posted by  Nmaslan  on Mon Sep 1 19:16 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.