Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Can't separate transmission from engine 700 1989

posted by  someone claiming to be rcsammy on  Fri Dec 19 13:56 CST 2003 [RELATED]

The bolts go thru the plate described by 745 TG and into the torque converter. You have to turn the engine to get to them one at a time. They are usually pretty tight and you have to keep crankshaft from rotating while you break them loose.I usually do this with a breaker bar and socket on the crank pulley bolt. Lot easier if you have a helper up front holding/turning crankshaft while you remove converter bolts.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Can't separate transmission from engine [700][1989]
posted by  Dwaldie  on Fri Dec 19 09:43 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.