Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ignition problems are back after all! 200 1983

There was a recall to install new ferules on the pin connectors of the ignition computer.Seems that some of the pins where not making good contact.I did this modification on my 83 240 and it helped.Then I had a problem with the single wire connector going from the ignition computer to the coil.This connector is subject to corrosion so I eliminated it.This wire(white with red stripe)has a shield on it.Fold the shield braid back and connect the main wires together.Soldering the connection is a good idea.Apply electrical tape or shrink wrap.After I did these two repairs never had another problem.Volvo eliminated these two weak areas in later models.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ignition problems are back after all! [200][1983]
posted by  VolvoKurt  on Thu Jan 15 12:41 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.