|
I though it was the other way around.
My d-jet engine is mothballed.
Phil S.'s d-jet page says:
"Temp Sensor #2:
ECU harness pin 23 to ground as follows...
Cold motor = roughly 2000 ohms.
Warm motor = well under 1000 ohms. "
I remember discovering how important that connection was one freezing day when the car started and started to drive fine, but would quickly degrade. Several stops later I bumped the wires while attempting to isolated the problem, and got myself home without further incident. I believe I had tried disconneting it altogether, and that made it worse. The harness was corroded and finding the small female connectors at that time was a problem, so I soldered the wires to the sensor.
|