Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2009 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

All shined up. 120-130

uid 28180's pic
posted by  ClassicVolvoShop on  Mon Nov 22 12:23 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

By having the setup like this, you could have problems here!

The OUTlet from engine is there for letting out fumes from burned oil and is NOT vacume.
The correct installation would be either a free outlet (into free air as they where originally in the early setups) or, direct to the intake manifold.

By sharing vacume from intake manifold as your setup is now, vacume for brakebooster is "wasted" by sharing! -you might also could have very accid oil-fumed-air into your brakebooster, BAD!

Also, the small tubes for screwing into the manifold have specific hole-size for each job.

I think you have an issue here to do a little more work to, before polishing the thermostat-housing!

:-)

If your brakebooster is working correctly - I would assume a lot of difference noticeable if you change your setup!

I hope my english gives you an idea - I think something is very wrong here!


--
/Soren






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New All shined up. [120-130]
posted by  pearl  on Mon Nov 22 02:04 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.