Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2007 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Installing my new Isky cam 140-160 1971

posted by  CyaLater on  Tue Aug 16 20:43 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have torn the engine down to the timming gears and set up the engine to be at TDC on No. 1. However when I look at the timming gears the mark on the larger fiber gear is 180 deg away from the mark on the crankshaft gear.

That position is TDC on No.1 & No.4, firing on No.4.
Turn the crank anther full turn to get to TDC on No.1 & No.4 with firing on No.1


Have you get the engine out of the car? Is the head off?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Installing my new Isky cam [140-160][1971]
posted by  someone claiming to be 145volvowayne  on Tue Aug 16 18:20 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.