Volvo AWD XC90 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2017 XC90 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

2007 heater fan and resistor/control module XC90 2007

posted by  KlausC on  Mon Nov 20 16:40 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

The only way to get that bolt is with the dash removed, and you don't want to go that route.

Obviously, one of the people did manage to break the case because he put in a new one. I suggest drawing the case down slowly to stress the tab and then pull harder. It will break, this is rigid plastic.

I would also replace both the blower and the resistor, no need to go through the procedure again for the blower. You can save the blower for when the new one starts making a lot of noise in 10 years :)
--
Keeping it running is better than buying new






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 2007 heater fan and resistor/control module [XC90][2007]
posted by  HHSIII  on Fri Nov 17 12:14 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.