Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wiper arm and spindle splines worn... 850 1995

posted by  Erwin on  Mon May 13 06:53 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:39 CST 2014
[RELATED]

Yesterday I decided to adjust the driver's side wiper that was coming to rest a bit high. I pulled the arm off to find that the splines in the arm and on the spindle are pretty worn out. The arm doesn't pivot loosely, yet, and barring paying for all the correct pieces to repair/replace, I'm considering using a dremel tool to cut a keyway in both the wiper arm and apindle and using a woodruff key to lock it in place. Actually, it wouldn't have to be square. Drilling a hole along the taper would allow a short piece of drill rod to be used for a key. I'll use the nut to secure it as it is now.

Crazy idea? I figure if it doesn't work I'll end up replacing both pieces anyway.
--
Erwin in Memphis, '95 855t - fast & comfy, '86 Guzzi LeMans - fast & loud, '76 Montesa 348 Cota - slow.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wiper arm and spindle splines worn... [850][1995]
posted by  Erwin  on Mon May 13 06:53 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.