Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2008 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Rear hatch seal rusting inside 850 wagon - How to replace? 850 1995

posted by  HO on  Wed Apr 20 04:16 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 12 14:01 CST 2014
[RELATED]

This is a common problem in all 850 wagon. I replaced mine a couple years ago.

You grep hold the old trim and pull it out from either side (slide it out). You will need some force to pull it out.

I ordered a new one from Volvo dealer. Installation is tricky and need a lot of pressing the new trim in place.

With the old trim out, I cleaned up the area (gap). Slide the new trim from either side slowly. It needs a lot of patient. After the new trim is in place, press down the trim firmly to make sure that it is "flat" all the way. I used my finger to do that and ended up with a sore finger tips. So, I used a small piece of wood to help me to complete the process.

Hope this help.

Ching-Ho Cheng
--
1995 855 NA, Bilstein Strut & Shocks, Volvo Protective Grill, K&N Filter, E-Code Lens, ClearCorner Light, Alpine CD-Changer, AutoDim RearView Mirror, 6000K HID






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear hatch seal rusting inside 850 wagon - How to replace? [850][1997]
posted by  someone claiming to be Ola  on Tue Apr 19 00:23 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.