Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing Engine Harness any thing to watch for? 200 1985

posted by  rhaire on  Mon Nov 19 03:24 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Aug 4 10:16 CST 2014
[RELATED]

I have done a dozen or so and never had to remove the intake manifold. I have found it is pretty easy to re-snap things as they should be, although on the B23 one can get the throttle switch and idle air valve swapped if you try hard enough. Not sure if that will apply to the B230. Watch the Hall connector at the distributor, you do not want to break that.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing Engine Harness any thing to watch for? [200][1985]
posted by  Stickbuilder subscriber  on Sun Nov 18 15:22 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.