Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Here's how to fix WUR. Ref to VW forum with 12 hi-def photos and writeup 200 1979

posted by  sutherml on  Tue Mar 16 23:30 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jun 29 19:15 CST 2013
[RELATED]

This is the best I've seen so far.
Besides WUR inlet filter stack clogged up he also lists another failure mode in which the valve body plate and pin were rusted together.
Although he modified the WUR to make it adjustable, might be OK to just dismantle, clean, regrease, rip out inlet filter stack, reassemble, and not to go to the extra effort of tapping out the valve body or pin. Although the WUR is finnicky. One post in a Porsche forum said that just replacing the O-ring in the valve body changed control pressure by 4 psi!
http://forums.vwvortex.com/zerothread?id=4655543






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Anyone successfully fixed K-Jet WUR (CPR)? Do methods in post really work? [200][1979]
posted by  sutherml  on Tue Mar 9 01:19 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.