Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

pressure testing 200 1979

posted by  dobber13 on  Thu Mar 11 13:38 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 19:10 CST 2014
[RELATED]

Hi Art, Im still waiting for the gauges so if you have pic's on the Turbo Tests that would be great. While I have your ear "In the Bentley" under 240-17 to test CPR #2 With the ignition ON check for battery voltage across the terminals of the regulator wiring harness connector.If there is no voltage,an open circuit exests in the power supply to the connector (blue) wire,or the path from the connector to the ground(black wire). Well the ground is good but I had no power with the ignition on to the blue wire.Then I checked for power when cranking and running???.So is there a problem or is there only power to the connector when cranking and running???? I guess what I'm asking is the a mistake in the Bentley? Thanks for any insight,Charlie






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Anyone successfully fixed K-Jet WUR (CPR)? Do methods in post really work? [200][1979]
posted by  sutherml  on Tue Mar 9 01:19 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.