Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Other options 200 1989

posted by  Swedish Baklava on  Thu Jan 10 20:30 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:40 CST 2014
[RELATED]

Hi Bork,

FYI.

How about file/sand/grind two sides flat & use a large plumbing wrench? I have never done it. It's just an idea...

use a round vice-grip.
http://www.ehow.com/how_7637106_remove-stripped-oil-drain-plug.html

weld a nut on top of it and hit with an impact wrench.
http://www.jeepforum.com/forum/f309/stripped-head-oil-pan-drain-plug-1310404/

maybe cutting a slot across the head of the plug so you can use a large flat blade screwdriver to loosen the plug...
http://www.modernbuddy.com/forum/topic18422.html

And one more...
http://blog.eastwood.com/eastwood-chatter/10-tricks-to-remove-stripped-stuck-bolts/

Last one...
http://www.motortrend.com/womt/112_9509_rusted_nuts_and_bolts/viewall.html

Good luck! I know you will get it out.

Swedish Baklava






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M47 Fill Bolt [200][1989]
posted by  B0RK ^3 subscriber  on Thu Jan 10 14:45 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.