Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

M47 Fill Bolt 200 1989

posted by  packard8 on  Fri Jan 11 16:12 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 16 15:16 CST 2014
[RELATED]

The plugs are NOT pipe plugs. They are straight thread with a copper gasket (I have three M47s all set up this way). NO torching -- there is a foam sound deadener up there, plus what is in the transmission. On my '90 I filed / ground (cut-off tool) the bolt until I had something I could grip, and it still didn't work. After about a month (and after I got new bolts & washers) I noticed some ATF seeping around the bolt. I was then able to turn it out with a cold chisel.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M47 Fill Bolt [200][1989]
posted by  B0RK ^3 subscriber  on Thu Jan 10 14:45 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.