Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

M47 Fill Bolt 200 1989

posted by  machine man on  Thu Jan 10 17:00 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 15:40 CST 2014
[RELATED]

Do not use a torch or any heat on the casing of a transmission. They have a coating or sealing paint on the insides to seal the castings even aluminum in a lot of cases. No pun intended!


You could try welding a hex nut onto the plug and the little bit of heat would be confined to that plug.
A bigger hex will impart greater torque than the original fitting had.

Phil






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M47 Fill Bolt [200][1989]
posted by  B0RK ^3 subscriber  on Thu Jan 10 14:45 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.