Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bleeding 93 240 brakes w/ABS and new master cylinder 200 1993

posted by  Paulii on  Sat Aug 3 19:52 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 6 03:04 CST 2014
[RELATED]

Not that your going to bleed your brakes every day, but I have found that the plastic fittings and the too short hose is a PITA. I use brake line that have the fittings of the right size and bend them deep into the reservoir to make sure I have no air. You can buy a 24 inch piece of brake line with the fittings and then cut in the middle and bend it. When your done hang them on a nail in the garage so when you need to do it again you can find it 5 or 7 years down the road. Pauli






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Bleeding 93 240 brakes w/ABS and new master cylinder [200][1993]
posted by  woodshavings  on Fri Aug 2 14:34 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.