Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

MAKING UP A REMOTE CONTROL STARTER WIRE 200 1984

uid 27's pic
posted by  Art Benstein on  Thu Sep 19 14:11 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 20:10 CST 2014
[RELATED]

The stuff in the bag, with the exception of the alligator and paper clips is all wiring found in junked Volvos.

The mounting for the trunk unlock switch labeled "Rear Release" is an out-of-print floss dispenser. Innovate if you can or pick up a purpose-made remote starter switch at an auto parts place. Once you have one, you'll be sure to use it all the time. :)

The pink insulated connector doesn't really fit well, but that type of connector is typically found in my junk collection only. Known to me and maybe a handful of others as "Hollingsworth" much like the cellophane tape is known as "Scotch."

After I crimped it on, I discovered the interference with the offset female socket used in the Volvo, so I nipped out one side of the pink plastic. Just use an uninsulated spade with a bit of sleeving over it to keep it out of trouble.




--
Art Benstein near Baltimore

Just say no to Captcha.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED MAKING UP A REMOTE CONTROL STARTER WIRE [200]
posted by  Salt N Pepper  on Thu Sep 19 02:22 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.