Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Mechanical Speedo Power Source 200 1985

uid 57475's pic
posted by  xDread92x on  Fri Sep 16 13:10 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Still unsure how to respond directly to your post.

I already checked voltage on the gray wire when cluster was working last week. I got 0 for voltage at cluster gray wire pin while cluster was on and connected. Voltage was coming off the stabilizer. 12.38, 9.96 I believe. The battery light wire (blue/red) was giving off over 12V and the brown wire (parking brake switch) was giving off like 2.68 set.

So I believe the issue may be in the harness. I also replaced the old sending unit with one from a 92 so I do not believe that is the culprit. I also got 0 at the sending unit connector for the gray wire.

My gas gauge has jumped before and worked for a few seconds in the past.

Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Mechanical Speedo Power Source [200][1985]
posted by  xDread92x  on Wed Sep 14 07:19 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.