Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2018 200 INDEX

[<<] [>>]

VIEW

REPLY TO THIS MESSAGE

SAVE

Zero adjust your meter 200 1991

posted by Amarin on Sun Dec 11 18:07 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Thu Oct 23 22:42 CST 2014

[RELATED]

Anil,

As you're using an analog multimeter (the one with moving needle) please ZERO ADJUST your meter prior to measuring resistance. You might get inaccurate resistance readings if you don't adjust it. Also pull off all wires to ignition coil prior to measuring.

See below:
http://cie-wc.edu/AnalogMultimeterBasicsandMeasuringResistance10_5_11.pdf

To measure resistance between terminals 1 and 15, set dial to X1 position. This for low ohm reading for the primary winding of the coil. Compare with the list below. To measure resistance between terminal 1 and centre high voltage terminal, set dial to X1K or X1000 position. In this position you have to multiply the reading by a thousand. This for high ohm reading for the secondary winding of the coil. Compare with the list below.

About the resistance specs of the your ignition coil:

Regards,
Amarin

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

Cranks good but not starting [200][1991]
posted by Anil_Agarwal on Sat Nov 19 16:30 CST 2016 >

Cranks good but not starting [200][1991]
posted by kittysgreyvolvo subscriber on Sat Nov 19 17:35 CST 2016 > V
- Cranks good but not starting [200][1991]
  posted by Anil_Agarwal on Sun Nov 20 07:46 CST 2016 > V
  - Cranks good but not starting [200][1991]
    posted by pageda on Sun Nov 20 07:50 CST 2016 > V
    - Cranks good but not starting [200][1991]
      posted by jwalker on Sun Nov 20 09:42 CST 2016 > V
    - Cranks good but not starting [200][1991]
      posted by Anil_Agarwal on Sun Nov 27 14:07 CST 2016 > V
      - Cranks good but not starting [200][1991]
        posted by pageda on Sun Nov 27 16:05 CST 2016 > V
        
        Cranks good but not starting [200][1991]
        posted by Anil_Agarwal on Mon Nov 28 09:33 CST 2016 > V
        
        Cranks good but not starting [200][1991]
        posted by jwalker on Mon Nov 28 10:14 CST 2016 > V
        
        Cranks good but not starting [200][1991]
        posted by pageda on Mon Nov 28 11:47 CST 2016 > V
        
        Cranks good but not starting [200][1991]
        posted by Art Benstein subscriber on Mon Nov 28 12:01 CST 2016 > V
        
        Update on Cranks good but not starting [200][1991]
        posted by Anil_Agarwal on Sun Jan 29 09:11 CST 2017 > V
        
        Cranks good but not starting [200][1991]
        posted by Anil_Agarwal on Mon Nov 28 14:08 CST 2016 > V
        
        Cranks good but not starting [200][1991]
        posted by pageda on Mon Nov 28 15:44 CST 2016 > V
        
        Cranks good but not starting [200][1991]
        posted by Anil_Agarwal on Thu Dec 1 12:45 CST 2016 > V
        
        Cranks good but not starting [200][1991]
        posted by jwalker on Sat Dec 3 08:58 CST 2016 > V
        
        Cranks good but not starting [200][1991]
        posted by Anil_Agarwal on Sat Dec 3 09:52 CST 2016 > V
        
        Cranks good but not starting [200][1991]
        posted by jwalker on Sat Dec 3 10:18 CST 2016 > V
        
        Frustration with advice [200][1991]
        posted by Art Benstein subscriber on Sat Dec 3 12:43 CST 2016 > V
        
        Frustration with advice [200][1991]
        posted by machine man subscriber on Sat Dec 3 15:29 CST 2016 > V
        
        Frustration with advice [200][1991]
        posted by jwalker on Sun Dec 4 08:05 CST 2016 > V
        
        Frustration with advice [200][1991]
        posted by machine man subscriber on Sun Dec 4 11:36 CST 2016 > V
        
        Phil [200][1991]
        posted by jwalker on Mon Dec 5 09:56 CST 2016 > V
        
        Jim [200][1991]
        posted by Art Benstein subscriber on Thu Dec 8 08:13 CST 2016 > V
        
        Jim [200][1991]
        posted by Anil_Agarwal on Thu Dec 8 08:59 CST 2016 > V
        
        Jim [200][1991]
        posted by boxvolvo on Thu Dec 8 11:13 CST 2016 > V
        
        The Knack [200][1991]
        posted by Art Benstein subscriber on Thu Dec 8 12:11 CST 2016 > V
        
        The Knack a.k.a. The Disease [200][1991]
        posted by TheBrickTank on Thu Dec 8 19:41 CST 2016 > V
        
        The Knack a.k.a. The Disease [200][1991]
        posted by Art Benstein subscriber on Thu Dec 8 20:55 CST 2016 > V
        
        Jim [200][1991]
        posted by machine man subscriber on Thu Dec 8 12:14 CST 2016 > V
        
        Coil checking. [200][1991]
        posted by Art Benstein subscriber on Thu Dec 8 13:23 CST 2016 > V
        
        Coil checking. [200][1991]
        posted by machine man subscriber on Thu Dec 8 14:57 CST 2016 > V
        
        Coil checking [200][1991]
        posted by Art Benstein subscriber on Thu Dec 8 16:07 CST 2016 > V
        
        Coil checking [200][1991]
        posted by Anil_Agarwal on Thu Dec 8 19:18 CST 2016 > V
        
        Coil checking [200][1991]
        posted by Art Benstein subscriber on Thu Dec 8 20:44 CST 2016 > V
        
        Coil checking [200][1991]
        posted by Anil_Agarwal on Fri Dec 9 09:18 CST 2016 > V
        
        CPS [200][1991]
        posted by Art Benstein subscriber on Fri Dec 9 11:40 CST 2016 > V
        
        CPS [200][1991]
        posted by jwalker on Sat Dec 10 10:12 CST 2016 > V
        
        Zero adjust your meter [200][1991]
        posted by Amarin on Sun Dec 11 18:07 CST 2016 > V
        
        Art [200][1991]
        posted by jwalker on Sat Dec 10 10:37 CST 2016 > V
        
        Cranks good but not starting [200][1991]
        posted by machine man subscriber on Sat Dec 3 15:21 CST 2016 > V
        
        Cranks good but not starting [200][1991]
        posted by machine man subscriber on Mon Nov 28 19:58 CST 2016 > V
        
        Cranks good but not starting [200][1991]
        posted by Anil_Agarwal on Tue Nov 29 18:21 CST 2016 > V
        
        Cranks good but not starting [200][1991]
        posted by machine man subscriber on Tue Nov 29 22:02 CST 2016 > V
        
        Creating a spark manually... [200][1991]
        posted by Art Benstein subscriber on Wed Nov 30 08:24 CST 2016 > V
        
        Creating a spark manually... [200][1991]
        posted by machine man subscriber on Wed Nov 30 11:27 CST 2016 > V
        
        Creating a spark manually... [200][1991]
        posted by Art Benstein subscriber on Wed Nov 30 12:39 CST 2016 > V
        
        Creating a spark manually... [200][1991]
        posted by machine man subscriber on Wed Nov 30 16:33 CST 2016 > V
        
        Creating a spark manually... [200][1991]
        posted by Art Benstein subscriber on Fri Dec 2 07:24 CST 2016 > V
        
        5 pin socket, 6 pin plug... [200][1991]
        posted by Art Benstein subscriber on Tue Nov 29 06:43 CST 2016 > V
        
        5 pin socket, 6 pin plug... [200][1991]
        posted by Onkel Udo II subscriber on Tue Nov 29 09:10 CST 2016 > V
        
        5 pin socket, 6 pin plug... [200][1991]
        posted by machine man subscriber on Tue Nov 29 12:29 CST 2016 > V
        
        5 pin socket, 6 pin plug... [200][1991]
        posted by Anil_Agarwal on Tue Nov 29 18:03 CST 2016 > V
        
        5 pin socket, 6 pin plug, 7 position connector [200][1991]
        posted by Art Benstein subscriber on Tue Nov 29 20:34 CST 2016 > V
        
        Cranks good but not starting [200][1991]
        posted by machine man subscriber on Mon Nov 28 12:44 CST 2016 > V
      - Cranks good but not starting [200][1991]
        posted by machine man subscriber on Sun Nov 27 17:48 CST 2016 > V

Cranks good but not starting [200][1991]
posted by machine man subscriber on Sat Nov 19 21:08 CST 2016 > V
- Cranks good but not starting [200][1991]
  posted by Anil_Agarwal on Sun Dec 4 10:00 CST 2016 > V
  - Cranks good but not starting [200][1991]
    posted by boxvolvo on Sun Dec 4 11:54 CST 2016 > V
  - Cranks good but not starting [200][1991]
    posted by machine man subscriber on Sun Dec 4 16:18 CST 2016 > V
    - Cranks good but not starting [200][1991]
      posted by Anil_Agarwal on Wed Dec 7 11:34 CST 2016 > V
      - A Guess and By Golly ! [200][1991]
        posted by machine man subscriber on Wed Dec 7 16:46 CST 2016 > V
        
        A Guess and By Golly ! [200][1991]
        posted by Anil_Agarwal on Wed Dec 7 17:58 CST 2016 > V
        
        A Guess and By Golly ! [200][1991]
        posted by machine man subscriber on Thu Dec 8 11:15 CST 2016 > V

Cranks good but not starting [200][1991]
posted by javalion subscriber on Sun Nov 20 22:08 CST 2016 > V

Cranks good but not starting [200][1991]
posted by machine man subscriber on Wed Dec 7 21:54 CST 2016 > V

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

Volvo RWD/200 Forum Index

Community Forums:

RWD

AWD

GATHERINGS

OPINIONS

PICKNPULL

V8

STORIES

Classifieds

Site Features

RWD Series/Models

AWD Series/Models

Volvo RWD 200 Forum

Zero adjust your meter 200 1991